e-mag problems, please help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hardr0ck68
    I miss Tom
    • Oct 2001
    • 783
    #1

    e-mag problems, please help

    hi,
    the background: i just bought an e-mag lower end, had one of my mini bodies machined to fit and put an x-valve in it. Im using a raptor adjustable and it does not seem like input pressure is any part of my problem.

    the problem: first off it skips shots, i will pull the trigger and it just will not fire. when it does fire it will do so for a long string then just stop again. i have only been playing around in e-mode mech mode seems fine, but hybread is screwy (sometimes it fired off the sensor other times it is an all mech pull). The next issue that worries me a lot is when i try to play with the settings, the first time i look at the led stuff it all works just fine, but if i pull the trigger it will only flashes red when i hit the top button to bring up the led stuff. it will continue to flash red in this manner for a couple of minutes when i hit the top button...sometimes i can even hit the bottom button and see the screen flash. When i do get the board to respond again all the settings have been set back execpt the TS counter. im really confused here, and i really wanted to play sunday blah....

    thanks for any help!!
    Tom was the last of a now extinct breed, a breed of players who build a community, a breed of owners who gave to the sport never taking more than what they deserved. I hope to see you at the feild again some day....
    Tags: None
    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664
      #2
      Back the trigger magnet out a bit. It sounds like the magnet's too close to the HES.

        Comment

        • hardr0ck68
          I miss Tom
          • Oct 2001
          • 783
          #3
          yeah you were right, i figured it out myself about a half hour after posting...so yeah i went and played last night with it and the consistancy blew, i would get 2 shots over the chrono fine then it would spike or drop, like 20-40 fps. LX is set up nice, i havent tried but im SURE if i went to a lower carrier it would leak (i have 3 other lx setups so i have gotten the feel for it). and the X-valve was right out of the box so all the o-rings should be fine....so why is it spiking and dropping?
          Tom was the last of a now extinct breed, a breed of players who build a community, a breed of owners who gave to the sport never taking more than what they deserved. I hope to see you at the feild again some day....

            Comment

            • hardr0ck68
              I miss Tom
              • Oct 2001
              • 783
              #4
              up the velocity is still psycho
              Tom was the last of a now extinct breed, a breed of players who build a community, a breed of owners who gave to the sport never taking more than what they deserved. I hope to see you at the feild again some day....

                Comment

                • ChucktheMAGician
                  Back at it
                  • Oct 2002
                  • 1855
                  #5
                  Originally posted by hardr0ck68
                  i havent tried but im SURE if i went to a lower carrier it would leak
                  A lower/smaller carrier may give you bolt stick. Larger/higher ones cause leaks. The chrono problem sounds like effects of not chronoing in manual. You need to hold the trigger back and then shoot quick on a Retro valve to get an accurate reading. The directions are around hear somewhere. Mine does the same way when I chrono w/ the electronics on but when I'm on to the field the shots are way to tight in a string for things to be that far off
                  Feedback from: AO,PBN

                    Comment

                    Previous template Next
                    Working...