e-mag is sick

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AUTOGUNNER69
    Registered User
    • May 2003
    • 47

    #1

    e-mag is sick

    ok here we go i got an emag wit x vavle lvl ten wit the the 1 line carrier and the beta tester spring.and i just put in a new reg piston and reg seat o ring.and even a new o ring on the vavle pin assembly.and i stil hear a leak in the back of my vavle sounds like just b4 the reg piston.in not sure on my volcity.o and im running a pmi 88 45 tank.sum 1 help ;(
    Some call it a game.some call it a sport.I call it life

    -bad company-
  • athomas
    Of course it works-its AGD
    • Jan 2002
    • 8039

    #2
    It could be the regulator piston o-ring. Did you replace this o-ring when you replaced the regulator piston?
    Except for the Automag in front, its usually the man behind the equipment that counts.

    Comment

    • AUTOGUNNER69
      Registered User
      • May 2003
      • 47

      #3
      it came wit a new o ring on it so i use that.
      Some call it a game.some call it a sport.I call it life

      -bad company-

      Comment

      • ignatz
        Black Flag
        • Dec 2002
        • 505

        #4
        Are you sure the 1 line carrier is the largest you can use without barrel leak?

        Will the marker fire in Mechanical mode with the velocity adjust turned down low enough to stop the rear leak?

        What happens with the smallest spring?
        My feedback.

        Comment

        Working...