Automag classic makes strange hissing noises when fired

[Cockr+Mag1225]

I got an Automag Classic about 6 months ago. It was fine for a couple of months(about 3) but then, when i would pull the trigger down to fire, it whould make a: SHWUPH noise(on the way down and on the way up). Then i got a level 10 about a month ago. It was better(the hissing) but it was still there(now only on the pulling of the trigger). I didnt upgrade the valve in any way, and i allways keep it oiled and clean. Please help me with this problem!

-Could this also be the reason of why i only get about 500-700(on a good day) shots with my 45/4500 tank????


-Cockr

[athomas]

Inspect the sear as well. If it shows signs of wear, replace it.

[Cockr+Mag1225]

OK ill look into that...anyone else...PLEASEEEEE!!!!!


-Cockr

[Cockr+Mag1225]

UP!!!!!!!!!!!!!!!!!!!!!!!!

[Smoke]

First, make sure you have the correct spacer in, if it's too large, you'll leak. Second, check your on/off pin, and oil up the o-ring. Then drop some oil in your air line, and see if that helps.

[Cockr+Mag1225]

Thanks