When ever I pull the trigger it will stay in for about 5 seconds then gas will release and the trigger will pop back. The gas being released is a lot less than the normal amount. I have tried changing the velocity, but no difference.
-
A One that isn't cold is scarecly a One at all.
Nothing is worse than getting gogged by a 400 lb "Elite Sniper" with full Camo, that has just spent $800 on a Tippman 98c... NOTHING.
Noob paintballer quote- "O crap, I'm out of bullets, don't kill me." -
Level 10 or Level 7 mag? -
I'm using a Phase 2 bolt. Do you think that would be it? I have a stock classic bolt that I could switch it with. I have been tinkering with it all day. Before, when I turned the gas on, nothing would happen. The sear wouldn't set and I couldn't get any action out of it. Then I got it to leak uncontrollably. Now I have made it do this.A One that isn't cold is scarecly a One at all.
Nothing is worse than getting gogged by a 400 lb "Elite Sniper" with full Camo, that has just spent $800 on a Tippman 98c... NOTHING.
Noob paintballer quote- "O crap, I'm out of bullets, don't kill me."Comment
-
Go back to the stock bolt #1.
My guess is that you have some bolt stickage. A longer powertube spacer would solve this. But first, check all your orings in the powertube and in the on/off. Also, make sure you run lube through it and oil the orings as well.Comment
Comment