barrel trouble

[Q01]

my new 68 has one problem. i just put on a new j&j ceramic barrel with new barrel orings and i cant get it off, i feel it starts to come off but then it stops moving and i cant get it to budge any more
can some one help me

[Q01]

i got the barrel off, but i had to take off the main rail to do it. maby it happened because it is a new barrel

[TSalPaintball]

HAve you watch the video that came with your marker to show you how to remove the barrel proplery (sp), if you have my barrel had the same problem it just needed to break in now it is fine!

[Q01]

ya it just need to brak in i bet now it goes in and out with some ease

[xmetal2001]

My friend used to have a mag and a boomstick. The barrel would never go in and out easily, it was really weird. Anyway, try putting a drop of oil on the orings on the barrel.

[schiesz]

I just had a problem getting my barrel on, but I found the problem. It was because I put on a z-grip (which has a smaller amount of space between the screw and the rail) and the screw holding on the grip went too far into the body and caused it to come up into the barrel's path. Made some nice cuts into my barrel before I figured it out.

[rikkter]

your twisting the barrel right?
oil the orings
also, is hard to put on also? if it is, on the twist lock assemply, you can adjust the tension from the bottom with a alan key

[Q01]

oil did the trick