Intellifeed prob

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nate2k191
    texas a+m maroon
    • Feb 2003
    • 1170

    #1

    Intellifeed prob

    i bought an intellifeed and after i hooked it up to my revy my revie only runs for like a second or two at a really low speed/power until it stops. i disconnected all the intellifeed wires and it sill only spun for a second or two.. i donno what it is. i checked the batteries, and it doesnt help. if anyone has any suggestions, OR knows where to get a new x-board reply.
    -fully upped mech mag (magzilla) www.havoc-online.com
    -upped 68 mag (class) My Feedback AIM = nate2k191
    -live in peace TK-
    AO-TX
  • nate2k191
    texas a+m maroon
    • Feb 2003
    • 1170

    #2
    whew, nevermind guys, when i "tapped into" the red wire i snipped one of the mini wires inside it, so i stripped it a bit more and wound them together tightly then put the intellifeed wires back in place, screwed it shut and it worked, thank god!
    -fully upped mech mag (magzilla) www.havoc-online.com
    -upped 68 mag (class) My Feedback AIM = nate2k191
    -live in peace TK-
    AO-TX

    Comment

    Working...