lvl 10 and low velosity

[Rumble]

i frequently play at an indoor field and the velosiy limit is about 250. will the level 10 go down that low?

[lack of grace]

Input pressure isnt ball velocity....you can adjust your fps to what ever you like under 300 feet while feeding your valve what it needs. ir (500 - 1000) Classic vs. uber reactive xvalve

[Rumble]

ok i have a PMI preset, at 850.... u think it will work?

[nt2004]

i can get mine down to around 160 or so(I made an indoor feild in my basement so i had to get it as low as possible for the rubber paintballs) and up around 380(completely by accident) and this is all with the shortest spring

[lack of grace]

yeah

it should work fine...

[Rumble]

ok thanks guys

[Evil Bob]

I use the middle spring and I can chrono as low as 200 before I get bolt stick and it refuses to fire. Using the longest spring, the lowest I could chrono before bolt stick was 265.

So if you run into bolt stick trying to drop down to indoor velocities, just switch to a smaller spring.

-Evil Bob

[Mag Master 04]

yea..

im chillin sumwhere around 255 with a 10 inch ultralight so im doin pritty good, and it still stops on paper and kicks like you wouldnt believe...good 'ole ReTro