Micro E-mag recharge problem
while shooting my micro e-mag, it doesnt recharge sometimes. the trigger rod stays back and the bolt doesnt return fully to its resting position. sometimes the rod will stay back but then slowly build pressure and the bolt and rod go back to the ready position. but sometimes the rod goes back and stays there. if it stays back, then i hit the back of the gun, the gun fires and the rod pops back out. i oiled all the seals, the reg. nut, the on/off and the power tube but the problem persisted. my tank is putting out 800psi and i have level 10 with the medium spring, 2 shims and the size 1 carrier.
-
-
HHEEELLLLLPPPPP?!?!?! -
Try adjusting how tight the field strip screw is. Hand tighten it and try that and tighten it with a field strip screw and try that.Comment
-
ill try that. how does the tightness of the screw affect the recharging of the valve? thanks alotComment
-
It doesn't affect the recharge rate, it keeps the sear from binding, which is what your issue sounds like.Comment
-
help
sorry to bother anyone..
but does anyone have spare grip frame screw and field strip screw to hook me up? I need spares and dont feel like paying retail on airgun.com
sorry if this is off topic..thanksComment
Comment