I got a automag body rail a few days ago, and i have the ULE body. I was woundering how I would I get it out? I tried hammering it and it dont' seem to come out. I dont want to stratch the body up. If theres a certain way to get it out plz let me know thanks!
-
-
hit it from the bottom up.
put a towel on it and cover the rail, and put like a book on the front of the rail(part closer to the twistlock) to give it leverage, and jsut give it a whack -
only way to get it out is to hit it with a hammerI knew not what I did but am now edumacatedComment
-
I tired taking out the twist lock pin, and it wont get out. I even tried hammering it also. Do I send the body rail back to AGD to see if they can take it out for me? thanksComment
-
that would just be a waste of time, a nice solid whack should just do the trick.
which side are you hitting it on?
try this, put it on the ground, face up(so the twist lick pin is up)
and step on it, then just try kicking it down a little
your weight should pop it outComment
-
if you have a press or ability to use one, that may help. but you should be able to just tap it right out with a hammer. just dont miss or cover the rail so you dont damage it
Speed Kills.........but so does everything else only slower
OSK
E-Mag, X-valve w/ level 10 <-- for sale
Free Flow Lotus Body E-bladeComment
Comment