Hyperframe stuff...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Lemon

    #1

    Hyperframe stuff...

    Hey I have a couple questions about the CF Hyperframe.


    Does it need the ULT to function without problems like leaking?

    Is there an upgrade board that lets you shoot over 13bps?

    This will determine whether I buy one or not.
    If you have one and wanna sell it plz pm me.

    Thanks.
  • ChucktheMAGician
    Back at it
    • Oct 2002
    • 1855

    #2
    I know they don't need the ULT to work right because they were out and working fine before the ULT, they do have their own on/off tho, I think it's longer but don't quote me on that. Not sure about the board, I'd call Centerflag, they are always helpful when I call, you can ask about the on/off too!
    Feedback from: AO,PBN

    Comment

    • Phaelynar
      Registered User
      • Aug 2003
      • 268

      #3
      I have a mag with a working 20 ball board. It didn't work when I had the stock on/off...it just kinda made some pingy noises and thats about it. The on/off assembly (entire thing, with on/off pin) was $24 (including shipping from their location in IL to MA)

      Comment

      • Lemon

        #4
        Where do you get the 20bps boards?
        What are they called?

        A litte more clarity on this whole on/off thing?

        Comment

        • Lemon

          #5
          How much???

          Comment

          • cgrieves

            #6
            It is possible that the Stock on/off will work with the Hyperframe in a classic valve, there are cases where it has.

            The Hyperframe comes with an RT style on/off pin with slightly slimmer diameter, and a special low friction on/off bottom O-ring. It also comes with an on/off bottom for use in classic valves.

            With a Retro valve, the Hyperframe usually works fine with the standard RT on/off assembly and pin, although it's worth making sure you have exactly the right length pin to avoid bolt wear. My secondhand hyperframe came with no on/off parts so I ordered them from Centerflag and got a normal length and an extra long pin just in case.

            Comment

            • Lemon

              #7
              Cool.

              How much would I be looking at for the 20bps board and what is it called?

              Thx.

              Comment

              • cgrieves

                #8
                Don't quote me, but I seem to remember they are $60-$70, less if you trade in a working board.

                Call centerflag for availability, they are very helpful.

                Comment

                • Lemon

                  #9
                  Is there an e-mail address?
                  Couldn't find one on their page and I don't feel like making an international call.

                  All I wanna do is order one.

                  Comment

                  • hitech
                    Not a shedder of vortices
                    • Nov 2001
                    • 4775

                    #10
                    As far as I know there is no other way to order than calling Centerflag.

                    Here is there contact information:
                    Centerflag Products
                    PO Box 148
                    Yorkville, Il 80560

                    Phone: 630-553-2611
                    Fax: 630-533-2631

                    Here is my Hyperframe FAQ. You might find some of that useful if you get one.


                    Hey Hitech your starting to sound like me! - AGD
                    Hitech is the man.... :eek: - Blennidae
                    The only Hitech Lubricant

                    Comment

                    Working...