Crazy Bounce
OK..ive posted multiples, times and still no reply, lets see if somebody can help? My Intelliframe is going reactive, it has a nice little sweetspot in the top part of the frame. The input pressure has been set from 750 to like 850, and still is has a bit of runaway activity. Any ideas on what to do?
-
2 da k da 2 Timmah.
Oh..it shoots da 620:1 .No problemo. -
Sear in cood condition? Field strip screw in tight? and have you adjusted the sear rod at all? -
You could try a longer on/off pin. Say .005" longer than the one you have now.
Comment
-
Thanks for posting fellas. Matt, how do I determine what the condition is? I cleaned it up perfectly, and the marker is treated like a queen. Field strip screw, always in tight, not overtightened, but perfect. As for the sear rod, where exactly am I looking for what I did wrong? Any specifics?
TAW- longer on/off pin MIGHT do the trick...I did notice lately that every since it started happening the sear has been pushed closer to the frame itself, if that has anything to do with it. I could probably get videos up if needed. Thanks!2 da k da 2 Timmah.
Oh..it shoots da 620:1 .No problemo.Comment
Comment