So, how do I? I don't see any screws or anything.
-
-
- First unscrew the large field strip screw located at the back end of the marker under the valve assembly.
- Slightly twist the valve while pulling straight out of the body after the field strip screw is out.
- Now you have the frame screw to remove that is located near the trigger. Unscrew this and it will release your body, body rail and trigger frame from each other.
Welcome to AO Forums and hope you like your Mag.... if that is what you have. For future reference you should mention marker type, air type, valve type, etc. when you have problems so people have a better idea on how to help you. Obviously, the info is dependant on problem. Good luck!
team PAIN "it's not fun and games until somebody gets hurt."
My AO Feedback -
Sorry, I should have been more specific. I have a classic mag that has the stock valve. I don't know if I'm mag retarted, but I it won't come off. Is there a diagram? Do I need to take the trigger frame off. I found the valve screw and took the valve out, but I can't find the field strip screw.Comment
-
see the silver screw right below the valve under the trigger frame in the back. thats the field strip screw take that out and the screw that is inside the trigger guard."The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"
Alway Remember *343*
Si vis pacem, para bellumComment
-
Well genius, I emailed the guy and it turns out he decided to glue the body on there. Why in the hell did you have to laugh at me? I'm not so retarded that I can't unscrew to screws.Comment
-
Dude your a jackarse, this could be the first time he has ever touched a mag, so get over your self for 2 and a half seconds and give him a break you loser.Originally posted by RenagadeOfFunkRTPcf
well you could...AHAHH "how do i take off the body" ..baaa hahahaa.....im sorry ou just made me hahahha i cant even finsh the sentence baah hahah....im sorry but just follow what the people say about the two screws...i was just really depressed since school started and you made me a little happier...thx...Comment
-
you tell him spongebob
Good Traders=HobbesTZ, Willy-T, Litestab, Impostal22 Lopxtc, Rapidshooter, Mer, Sharpshooter1286, Automagking182, PBCustom98, SIGSays, TjusseryComment
-
He's from Chicago, give him a break. You know, with the Bears sucking and all, he has a right to be rude. lolComment
-
You tell him, Shadowman79! I love it, but I need to hear more: Why did the previous owner feel the need to glue the body onto the rail?Originally posted by Shadowman79
Well genius, I emailed the guy and it turns out he decided to glue the body on there. Why in the hell did you have to laugh at me? I'm not so retarded that I can't unscrew to screws.Comment
-
Well, it turns out he didn't really glue it. He spray painted the body and didn't wait for it to completely dry before he put it back on. So I had to chip the body off pretty much. Thanks for all of the help guys(except you RenagadeOfFunkRTPcf).Comment
-
RenagadeOfFunkRTPcf shouldnt be scrutinized by someone who can't even have to get thier body off because they don't know what Screws are. "Shadowman79: I don't see any screws or anything." you couldve told us that your screw holes on the bottom of your rail was empty, by the way this is a question i dont know, what holds your twist lock barrel assembly pin in? i thought its the screw that holds the body to the trigger right above the trigger? what do you mean you dont see any screws? what holds your valve in? (that would be your field strip screw)- AGD "Yea well our intention is to
take over the world....one country at a time..... :)" - Rt Pro X Valved Warp fed My Rtp
- Props to Echo for the sig
Comment
- AGD "Yea well our intention is to
Comment