On my e-mag. With the Smallest spring. 3 shims. When i walk the trigger really fast the level 10 kicks in like there is a blockage but there is nothing there..its only when i start ripping on it...
-
try a heavier main spring. it is prolly not resetting fast enough on high ROF.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pages -
I have the same problem but can never seem to get any of the bigger springs to work so I just deal with it. Also, BlackVCG has said that shims really aren't necessary so try taking those out and see what happens.Comment
-
Make sure your velocity is high enough. Should be around 280-300 for it to work reliably.
Make sure the carrier o-ring fit is the loosest without leaking. Use the same o-ring when you switch carrier sizes.
Check the barrel you're using. If they aren't bored on center, they will drag the bolt and cause it to stick and sound like it was pinching a ball. Try it without a barrel or a different barrel.Comment
-
-
emag wont work
try checking your input pr. i had to run mine 750 to 900 to make it work and it will screm nowone fast emag..Comment
-
time for the catch 22 of emags and level 10..
The last poster was right. You need more input pressure or a faster charging tank. The Level X needs to have at least 700 psi to fire correctly and will still scoff at really high rates of fire. If you run at 800 - 850 you should not have a problem.. But here is the problem... Your reactivity will be increased greatly. Now you are stuck in an area I have yet to find an answer for you. If you dont play tourneys, no problem. If you do, PRAY you get a forgiving judge, and carry a backup marker just incase.Comment
Comment