I have a classic automag with a retro valve. I just got it, so i'm not really sure on the things i may have to do to get it running. I gassed up my gun and the trigger snapped forward (which is normal). The gun then shot, but the trigger didn't reset even if when i pulled it forward. Is there anyhting I can do to fix this. Thanks in advance.
-
Automag Classic (CF55394)
10" Progressive
Chrome Intelliframe
Powerfeed Body
Chrome Flame Drop Forward
2003 32* Expansion Chamber
48/3K Pure Energy
12 V Rev with X-Board
My E-Bay Feedback: http://cgi2.ebay.com/aw-cgi/eBayISAPI.dll?ViewFeedback&userid=gvquad86 -
Turn up the velocity until it starts shooting reliably.
If that doesn't help, try pushing back on the bolt when the trigger doesn't return. If you hear it click and then the trigger returns, you have bolt stick. If the valve has Level 7, increase the spacer size and if it has Level 10, increase the carrier size. -
Thanks, I'll try that. Anyone else have any other solutions just in case that doesn't work?Automag Classic (CF55394)
10" Progressive
Chrome Intelliframe
Powerfeed Body
Chrome Flame Drop Forward
2003 32* Expansion Chamber
48/3K Pure Energy
12 V Rev with X-Board
My E-Bay Feedback: http://cgi2.ebay.com/aw-cgi/eBayISAPI.dll?ViewFeedback&userid=gvquad86Comment
Comment