How many on-off o-ring sets, pieces and everything else are there in the 68 Automag on-off valve? I really need to know what i just did to it.
-
StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
-
I have looked at the diagram on the side and cant really understand it cuz its worn.StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
-
the on/off assembly is assembled like this
-Urathane O-Ring
-smaller white teflon oring (seated inside of the urathane o-ring)
-On/Off Top
-On/Off bottom with teflon o-ring on the 'top' of the on/off bottom and a urathane oring around the base of the on/off bottom
-last but not least, the on/off pin with the 'notched' end towards you and the flat end in the valve.
Hope this helps, you can also get a copy of the cross section of a mag at www.airgun.com.Comment
-
Thank You!
StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
Comment
-
Your Welcome!
Pleased to be of service, I had the feeling that description might be a bit confusing, I know it was for me a little bit, and I know how the on/off goes in!
Comment
Comment