on-off valve ain't workin!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ben Gebauer
    benyjammin
    • Jun 2003
    • 9
    #1

    on-off valve ain't workin!

    OK, my setup is a Retro valve with Lvl 10 and the boo-yaah trigger frame. When I gas it up, everything is fine and the on-off pin is pushed down, pushing the sear against the solanoid, but when I pull the trigger, it pushes the sear back a short ways and does nothing! The gun doesn't leak or fire! The sear then just clicks back into place like its ready to be fired. Whats wrong? Is the pin too short?
    Any help appreciated!
    Tags: None
    • sneakyhacker420
      AO's Uber Green Guru
      • Aug 2002
      • 1247
      #2
      contact Hostage on AO, he is probably the leading Boo-Yah mag frame tech that i've ever heard of
      Proud Member Of The AO Cesspool Since 08-24-2002

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039
          #3
          Was the gun working in any configuration before? If yes, what changes/additions were made?
          Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • xen_100
              super-uber spyder tech
              • Oct 2002
              • 1203
              #4
              if it is really pulling the sear, then it sounds like your LX bolt is too tight/sticking. try the next higher carrier or lube it up before firing it.

              "super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
              Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
              Xen's paintball pages

                Comment

                • Ben Gebauer
                  benyjammin
                  • Jun 2003
                  • 9
                  #5
                  Stupid problem fixed

                  Well, got it workin, sort of. I had to adust the solanoid. It was too far back and was not pushing the sear all the way (yeah kinda stupid)I need to adjust it a little more but it should be good!
                  Thanx for the help though!

                    Comment

                    • Ben Gebauer
                      benyjammin
                      • Jun 2003
                      • 9
                      #6
                      hoo-haw! it's kickin now!

                      Got the noid adjusted and it works great! 15 bps and no chop's! Very sweet! Anybody interested to buy a totally tricked out minimag ($700)? Pic's available. Have to sell soon, dept is evil

                        Comment

                        Previous template Next
                        Working...