making the x-mag rip ?

[speedyfox666]

Hey guys

this weekend I had the opportunity to try the new shocker.

This thing really rips but I don't want my X-mag to do less good so now my question is.

How can I make the x-mag rip as fast as a shocker '03

what do I have to change ? (I like the shocker trigger, but I don't think this one exists for mag's )

or how i have to set up the trigger to make it firing faster?

please help me out because I don't wan't to buy a shocker

[Z-man]

I would say that it's more a matter of what you can do. Check my video in my Sig "Wanna Race" I made these 2 videos after listening over and over to all this "faster gun" stuff. That fist video is me pulling the trigger each time (15pbs max) the secons is the rapid fire that all RT valved Mags (including E-mags and X-mags will do as well). Better have a Halo to pull that off.

So, can you pull it that fast or do you want the Shocker becasue someone else can pull it that fast?

[speedyfox666]

well, I pulled the shocker that fast myself.
in fact it's the first marker that I got my hand on that I can pull faster than any hopper.

otherwise it wouldn't bother me. If I can't shoot that fast it's just me and then I don't need a faster marker but in this case...

[Dayspring]

Well, did you tune the Xmag trigger? If not, that's your stopping point.

[speedyfox666]

what do you mean by "tune the trigger"

I adjusted it to a small stroke but that doesn't really help a lot.

Do I have to change the magnets in the grip frame to ?
(I have now 1 o-ring and 1 magnet in it.

(triggerstroke is about 1.5 mm - 2 mm )

I 'd like to put on a blade type trigger but I have no idea where to find that in europe.

please help me out .

[Dayspring]

There are three things adjustable on the Emag/Xmag trigger.

1) Number of magnets in the gripframe. This'll take care of the tension that you have to pull against.

2) Trigger magnet- where in the trigger stroke the gun will fire.

3) The set screw on the selector switch. (You have to take the rail off to get at this.) This will limit the travel of the Electronic pull.

Go to town.

[speedyfox666]

now it's leaking !

well, thanks guys

I have tried several setup and now it begins to rip (not as the shocker but I can live with that , just practicing a little bit more.

but now it starts leaking down the barrel !

4 days ago I had a leak too, I changed the carrier 1 size smaller and it stopped, but now after 4000 shots it starts leaking when the tank drops under 1000 psi.

I let of air (most of it , 250 remaining ) and this night when I slept (yeah, it's right beside me) I suddenly heard air leaking down the barrel again !

do I have to change the carrier again ? after 4000 shots ?
or could it be the shims (i have 2 in it )


(I know this doesn't belong here and that there are threads on this forum but I have read the most of them and I don't find my problem there.

[SocialD]

I'm kind of new to the Level-10, but it seems like it needs a little oil about every case of paint or so. It is possible that the o-ring is just a little dry and that is what is causing the leak.