bolt problems

[paintballfeign]

I had my first problem with my mag today . The trigger rod kept on not coming back out after releasing the trigger. I cleaned it and made sure it had plenty of oil, but it still happened. It would pop out if I smacked the valve with my palm but it was annoying to do that after everyshot. Could anybody please tell me what might be wrong and how to fix it.

THANKS

[athomas]

Try replacing the bolt spring. If the bolt spring is worn, the bolt will not reset properly. If the bolt does not reset, the trigger will not be pushed forward by the on/off pin.

[paintballfeign]

thank you

[afrankart]

If you have a level 10 installed, make sure you are running the loosest carrier you can without getting leaks. Also, a shim adjustment might be in order.

To see if your spring is worn, just slide it on the bolt and make sure that at least 1/8 inch of the spring is past the tip of the bolt.

[paintballfeign]

I changed my bolt spring and that worked.
Thanks again guys