hook intellaframe to richochet 2k loader

[eddino123]

can u hook up a intella frame to a
richochet 2k loader!
i hooked it up and everytime u shoot it
it turns it off and back on witch makes it
spin but i was wondering if theirs any other
way so it doesn't turn off it just spins!
thanks for your help
eddino123

[PFNitroAutomag]

why would u want to hooked it up to a riko anyway

[�?�� �m���]

no reason you need to, it spins everytime already i think a ball moves down the neck

[benzy2]

ricos sensor is like a micro switch. Every time a ball goes down the feed neck it trips the switch and the hopper spins. This is just like being intellifed as it is activated by the ball touching the sensor. Therefore it cant miss a ball and everytime another falls it reads it and spins. This is why you need no intellifeed on a rico. The switch is in the feedneck instead of the trigger but still gives the same results

[eddino123]

my bad guys i forgot to say that the sensor is
not working! the motor spins the blade when i
turn it on and off but not when a ball passes
through! so their for i want to hook it up
so when i pull the trigger it will
make it spin!
thanks for the help!

[speeddemon]

I'm saying this without seeing one, but there should be 2 wires going into the microswitch on the Rico, so do the intelliframe mod, and hook up those 2 wires to the ones coming out of the switch in the Rico.

[xen_100]

exactly......I would bypass the micro in the rico totally. it sounds like you are shorting the hopper out. that is why it turns off and starts over everytime you pull the trigger. I wouldn't be using it this way.

how do you have it hooked up?