Hmm. Well I think i fixed my mag im not sure. It wont rapid fire, it like wont recharge. The back valve is VERY cold right now. Its firing like 270-263-277-264 on C02. If i hold down the trigger it takes about 3 seconds before i get a very slow lawn sprinkler noise. I need some help. I replaced everything in the first aid kit including reg piston o ring an on off o rings and the power tube o ring and reg set and o ring. I need some help and ideas.
-
StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
-
What's happening is the reg seat is freezing. Three things you can do:1)get and expansion chamber or antisiphon tank 2)don't shoot fast or 3) get nitro. -
Now its not venting out the back. I normally shoot nitro but my field is out. The gun will barely shoot 5 feet then it wont shoot.StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
Comment
-
That is what happens when the reg seat is dirty or frozen.Comment
-
I replaced the reg seat 2 times, It does the same thing.StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
Comment
-
I'd have to say send it back to AGD to see if they know the problem.Comment
-
get nitro or compressed air, if u have the money
Comment
Comment