Compatibility question

[Biscuit]

This may have already been asked and answered but since I'm new here I'll ask again. Is the new LX compatible with a Centerflag/Booyah type trigger frame?

Thanks in advance

[ChucktheMAGician]

Yes, and Welcome to AO

[Kevmaster]

Most certainly is

[Biscuit]

Thanx guys. Have you installed them on your markers? Any helpful tips that you might be able to offer me would be greatly appreciated.

Thanks again

[ChucktheMAGician]

I have LX in my emag and my Retro Valve. I use just a classic valve on my Boo-yaah Micro, not enough money for an extra LX kit right now. If you have the mag running right now switching over to LX would be as easy as using any other frame. Here's a good thread to get you started, http://www.automags.org/forums/showt...threadid=40904

[Biscuit]

I have 2 Mags, one with a Boo-yaah frame and the other with a TASO .45 grip frame. I'm trying to install the LX on my ELCD framed Mag, but wasn't having much success. I have ordered new parts for the AIR so I can turn up the pressure without it venting on me (having a senior moment 'cause I can't remember the parts name).

[Biscuit]

I've been over all of the install tips from AGD on the supplied mini disc. I have some other things to attempt on my install before I really go bonkers. What carrier/shim setup are you using for yours?

Thanx again

[Dayspring]

Reg piston.

Originally posted by Biscuit
I have 2 Mags, one with a Boo-yaah frame and the other with a TASO .45 grip frame. I'm trying to install the LX on my ELCD framed Mag, but wasn't having much success. I have ordered new parts for the AIR so I can turn up the pressure without it venting on me (having a senior moment 'cause I can't remember the parts name).

[Biscuit]

Thanx Day! (Note to self: Remember to take your Ginko)

[ChucktheMAGician]

Originally posted by Biscuit
What carrier/shim setup are you using for yours?
Thanx again

Middle Spring, 2 shims and 1.5 carrier.

[Big'n slo]

Originally posted by ChucktheMAGician

Middle Spring, 2 shims and 1.5 carrier.

Ditto for my Hypermag

[Biscuit]

Thanx Chuck & B 'n S. I'll give that combo a try. I found that the 1.5 worked for me as well but since I need the new HP reg piston I'll have to wait for them to come in before I do much more.