ok need help...wierd popping noise...

[laxster08]

ok..i took apart my classic mag b/c i wanted to saw down the feed tube of the body which was huge...so i put it back together...i thought i did everything right..took me a lil bit b/c it was only my second time takin apart my mag...n e ways...i put in a co2 tank(gettin n2 soon) and shot..it seemed fine..the trigger seemed a little heave thoug, then when i went to take it off...a **** load of co2 came out and at the end there was a big popping noise...i need help b/c this has never happened before..thanks

[PyRo]

Ok, you went to take out the co2 tank right? I think it is normal if you have no on-off for gas to come out. The pop was probably the release of alot of pressure or your o-ring breaking.

[laxster08]

no like it was ALOOOOOT OF co2..alot alot..and the orings didnt break...i did it 2 times

[PyRo]

Where is it comming out of? If its by the tank threads-asa just unscrew the tank faster or somthing. Or am I wrong? Someone else?

[xen_100]

first of all, you are more than likely getting liquid into the gun. liquid co2 produces alot more gas than just gaseous co2 by itself. so, it will tkae longer to vent it all off. doo you have an x-chamber? sometimes those can hold alot of liquid co2 in them.

a better way to take your tank off is this: unscrew it about 1/2 turn. there should not be any gas leaking out of the ASA at this point. now shoot the gun until all the gas in the lines are gone. then unscrew the tank the rest of the way. you wont hurt the tank o-ring and you wont have any co2 rushing out of the ASA.

[laxster08]

i have an x-chabmer

[xen_100]

anti-siphon tank?

if not, I bet it is just liquid getting into the x-chamber. One of the guys in our club can hold about 30 shots in his x-chamber.

[laxster08]

myabe..once i get N2 i think it will all be fixed haha