Gun Messed Up Bad

[slimsunny34]

I just replaced all the o rings in my valve and then hooked my co2 tank up to it. When i pull the trigger back just a little, it starts venting air out the barrel. and after i pull the trigger a few times it will just keep leaking air out the barrel even with me not touching the trigger. this gun worked fine on co2 before this. could someone please tell me what's wrong.

[Dayspring]

I certainly hope you're not running CO2 on your xvalve.

[slimsunny34]

forgot to mention this is my old gun with classic valve

[Dayspring]

Does the leak stop when you pull and hold the trigger?

Does this gun have a level 10?

[slimsunny34]

no level 10
and yes it stops when i hold the trigger

[Dayspring]

and you replaced all the orings in the powertube? Cuz that's where your leak is.

Either that or you need to change your spacer.

BTW- use your sig once per thread. You can disable it after the first post.

[slimsunny34]

i replaced the power tube oring and the power tube tip oring. just to be sure, are both those orings supposed to be the same size?

[Dayspring]

No. 2 different sizes.

[slimsunny34]

well crap that could be my problem. is the one in the tip supposed to be bigger than the one below the spacer?

[slimsunny34]

put a bigger oring on, that fixed the problem, thanks a lot man.

[Dayspring]

Yes.