Wadjapay for your centerfeed barrel?

[tjussery]

new barrel

If you like the boomstick, you'll love the new powerlyte barrel. Check it out: http://www.powerlyte.com

[X-Plosive]

doesn't whitewolf do the exact same thing for $15 a barrel? It may not be whitewolf but I remember someone on PBC who ofered it.

[damageinc54]

Tjussery-I do not know what you have had done to your barrel but I guarantee that the barrels I mill do not "move if you play hard " to use your own words. I do not know any mag owners that want their barrels moving around on them while they are playing. My barrels stay put until you take it out of the twist lock. You have not seen a pic of what I do or used one of my modified barrels and you have the knowledge to say that I am modifying the wrong aspect of the barrel? I think that you should at least see what I am doing before you start to criticize it.

X-plosive-I do not know of anybody on PBC that does this. There may be, I just do not know. I do not post on PBC anymore because there is not enough traffic there anymore. Perhaps you did not notice but I am only charging $15.00/barrel also. The first one being $25.00 is for set up purposes and all barrels thereafter are $15.00 each. To do all barrels for $15.00 shipped would not be worth it to me. I thought that I made this very clear in my previous post.

[damageinc54]

Here is a pic of one of my modified barrels. Notice the hole just to the left of the barrel slot. This is exactly where the hole needs to be located for the ball hole to line up with a centerfeed body. I mill it so that you cannot twist the barrel past the hole. It removes just like any other barrel and it holds in place just fine.

[tjussery]

Not criticizing, misunderstood.

Damageinc54- Sorry If I came across as criticizing but when you described the "hole" for center feed, I thought you were referring to the hole the ball goes through. Now that you have you pic on, I can see that you have pretty much the same as I do. And, no I did not do the work to my barrel, I came across it. The barrel lock slot looks like a "T" so I can use it for a right hand or center feed. I sure that yours is a quality job!

[jimmyjobob]

tjussery

a t-groove is for left and right feeds. you cannot use it on a center feed. it may seem to be working now, but as time goes one. it will loosen up and slide. this is not recommended at all, and to be honest i dont see how you could get off more than 2 shots without having the barrel turn.

hate to take this tone, but there are indivduals claiming that they have centerfed barrels, just becasue of the tgroove, not so. these work only on right and left feeds.

[damageinc54]

I aggree with jimmyjobob. The barrels with a T groove rather than the two indivdual grooves is presenting me a challenge. I like a challenge :) I am still in the testing process with T groove barrels. Barrels with the two individual grooves however are working just fine. The pic I posted is a DYE Stainless. I have not had any problems with the barrels I have modified. I have been using them in my cenerfeed Emag. Is anybody ready to get theirs done? I currently have none to do so I can do yours as soon as I receive them.

[damageinc54]

up :)

[damageinc54]

up!

[Starfire]

I bought a center feed freak, I had to custom order it from Smarts Parts tho =p

[damageinc54]

Starfire-How much did SP charge you to special order the centerfeed freak? Did you get aluminum or SS.

[Starfire]

I paid 250 for the entire kit, I got Aluminum. With black back and silver front.

[damageinc54]

Man does Smart Parts charge a lot of money for the kit directly from them! ! I bought my kit with a SS back and red tip for 235.00 online! Here is your example guys. Do not pay too much for a manufacturer to custom make a centerfeed for you when I can do it for the cheap prices that I posted above. I would be really interested to know the price difference between a centerfeed and standard feed barrel from Smart Parts. I would be willing to bet that they are charging way to much to change one dimension in their CNC program.

[damageinc54]

Up :)

[X-Plosive]

It looks professional. Nice job. Maybe you should try it in the classifieds forum. The title is kind of misleading, you also changed topics in the middle of the thread.