gun problem! please help

[AGDpooper87]

Ok heres the deal i have a minimag with lvl ten and hyper frame.....When i first installed the hyper it was workin fine then after bout 500 shot. I de-gased it later on i wanted to play around some more....and it didnt fire.. Please help!!

If you have a hyperframe with level ten
wat is your set-up with the level 10

[PyRo]

Do you know if its a matter of your hyperframe not working, or a problem in the valve?

[AGDpooper87]

no its not the hyperframe it works fine b/c i put the old Level 7 in and it was working fine! but u know chopping like crazy.....but istn there suppose to be a small gap in between the bolt and the bumper..on mine there isnt.....when i have the lvl7 in there was and it was working

Is this the problem??

[PyRo]

Is the level 10 installed right?

[Kevmaster]

my gun flat out stops shooting with about 600psi left in the tank b/c of the way the LX is set up. Make sure your tank is full (at least 1000psi in the bottle)

turn the velo up some and see if it works?

whats your LX setup look like (carriers, shims, spring)

[AGDpooper87]

yes my level 10 set-up is installed correct....cuz i had it b4 i got my hyper and never had problems....
my setup up is
carrier with 1 slit
3shims
normal spring