need help with new emag

[judster]

ok i am at a loss here. my wife just bought a proteam micro emag last week along wiht a new 68/400 flatline tank. we took it out to play a scenario this weekend and this is what happened. 1st is chronoed fine and was consistant. after we hit the field about an hour later she went to fire it and nothing happened. as she was walking off field fiddleing with it, the gun started fireing and was ok for about an hour. well she finally let me play with it and i put it into hybred mode and went to go gun up on a player. it cycled a few shots with no balles leaving the gun then stared to work fine. this continued all day until night time play and the emag decided not to work. the gun has air to it but it look like the sear is not going back into place. even in manual mode the gun does not fire. we took it appart and cleaned it and still, it airs up but does not fire. now i know nothing about emags so any help will be greatful. if i need to go into more detail let me know and i will we have a scenario at sherwood in a few weeks and the gun needs to be up and running. thanks for the help

[maglover52]

does it have lvl10? was it brand new or used?

[judster]

yea it has a lx in it....the gun was bought used and the tank was bought new.

[maglover52]

does the gun sound like its leaking at all? it may be the lvl10 causeing you the trouble.

[judster]

i thought it could bethe lx but there is no leak. it seems like that the gun is getting air but the on/off is not resetting to cycle the air. when its turned to electro you can hear the 'clicking' cound like its trying to fire but no air is being cycled. can the lx effect effect the on/off. i know the gun is getting air because when i try to break the gun down there is still air in the hose and in the chamber.

[Kevmaster]

with the LX, you may need to adjust the velocity higher than with the regular level 7 bolt. I would give the velocity a good 1/2 turn and see if it fires. Make sure the tank has at least 1000psi in the bottle, and is sending at least 800psi to the marker.

if its not firing in mech mode or e-mode (esp when you hear the solenoid clicking in emode), it is most likely the level 10 causing the problem.

[Potatoboy]

take the grip cover off, and check if the clevis/solenoid plunger assy is perfectly straight. if it isn't, straighten it, and it should work fine...