Help with emag

[INSANEautomagER]

When i put my emag in electic mode it only fires like once then it will act like the solinoid is pulling on the sear but it doesn't fire the gun. Is there something wrong with the sear rod lenght. I was wondering what all the lenght were?

[ICOM]

you have level 10? also try tech forum

[Nick O time]

maybe the battery is broken or something

that is what happened with mine and i am going to call up AGD hopefully on friday or something and tell them that my battery is broken and hopefully they will replace it for free.

[lord1234]

have u charged the battery?

[sps16]

hall sensor not triggering?

[Skoad]

most likely have your trigger magnet too close to the sensor.....after you pull it once if you go to look at the led screen when you push a button does it look all scrambled for a half second then disappear?

back out the magnet a bit if so.

edit: after reading the post again i must have missed that it actuall fires once, then tries to fire again but can't....so that might not be the prob :P

[athomas]

Does it fire correctly in manual mode?

[judster]

something simillar happend to my wifes emag. it would fire in electro but if it set arounbd for awhile the gun would cycle but no shots came out. i took it to brad and he adjusted the magnets and it still didthe same thing. come to find out the on/off pin was broke and had to be replaced

[rmhawk]

i wish i could say my wife had an emag

[INSANEautomagER]

works fine in maunel mode and it seems when i pull the trigger that it pulls on the solinoid but doesn't pull hard enought the battery is fully charged. I tink it the sear rod lenght or something