quick Xmag/Ace question

[BajaBoy]

ok when you adjust the Ace pot.. is it a one time thing? or do you have to mess with it everytime you change paint colors..


like say i adjusted it for black/deep purple would that be good for any color then?

[ah137]

you should really adjust it every time you use a differnt color paint for best results. But you could set it up with darker paint and just leave it, the problem is a very light colored paint will signal the board before the ball is complety loaded in the breach(LX may pinch). Is it going to be a big problem... I doubt it but you should check.

~Hills

[VR4SL]

It says in the manual not to even bother adjusting it, they just do it at the factory, though I would expect this is just a "Basic" adjustment. Easy way to check, go to a chrono area without your hopper on, bring 10 balls, and turn on ACE 2. pull the trigger and hold it-(it should not fire), and drop a ball in, one at a time, repeating with the next 9: pull, Hold, drop. If it fires without the LX resetting showing it pinched, then you should be OK. if it pinches, you may need to readjust it.

Anyone know why some manuals say that ACE 1 is for single color, Ace 2 is for 2 color, and some manuals say that ACE 1 is for adjustment, and ACE 2 is for any color/multiple colors...?

[BajaBoy]

Hills, do you think we can talk on aol? im just going to be wiring my Ace board in my emag and i just need a little help.

(or anyone with an xmag can help me.. all u have to do is pull off the grips)

my Aim is... Bajaboy Agd


also guys the reason why i asked if i Had to adjust it was bc the adjustment nob does not match up with the hole in my frame and i didnt wanna have to drill a bigger hole if i didnt have too.


thanx guys!

[ah137]

http://www.automags.org/forums/showthread.php?s=&threadid=105062

check this I put up a few days ago

~Hills

[BajaBoy]

hmm thanx now i know hot to adjust it..

but could u take a min and take a close up pic of the wiring on the emag's Pc board? i know where the ace hooks up to but im not sure which wire goes in which socket

thanx

[BajaBoy]

Uppp.. i need a pic guys

[BajaBoy]

up

[fire1811]

sry missed this thread


this should help
if ya need anymore let me know

http://www.automags.org/forums/showthread.php?s=&threadid=86844&highlight=ace+pictures