x-valve and intelliframe question

[A_atheist]

[A_atheist]

after fiddling with the connections, i was able to get the trigger to seat and have pressure agininst it. But the gun will still not fire. I replace the longest spring on the bolt with the middle one prior to getting the trigger to set up. I cant get the gun to depressurize to safely take it apart. i removed the air system with no problem, but the guns valve is still fully charged, the trigger moves, but no air is coming out anywhere. How can i remove the air wihtout danger?

[paintpiggie]

ooh..
thats scary.

did you take the tank off and everything?

as for the level 10. add shims, so you can vent it out.
oil the on/off pin too while youre at it. might wanna tone
down the output tho. compressed air is a scary animal.

you got the steelhose fittings? or macro?
coz with the macro, you can leak it out slowly by pressing
down on the part of the fitting that locks on the the
hose.

[A_atheist]

thanks for the info, the shims worked great! to get rid of the air. thanks