automag RT question

[P@intB@ll_Cr@Zy]

I am purchasing a used eclipse automag RT (2 years old) and I was wondering if any major changes went on in the past couple years. If so, could you please explain. Thanks.

Jeremy

[Dubstar112]

No major changes have taken place, you might want to consider warpfeed as an upgrade Other than that, maybe a spare parts kit and some orings

*edit*- do yo have the adjustable parabolic p/f plug? If not get one by calling AGD up

[Thordic]

There was the change from the RT to the RT pro. The newer RTs (the Pro) simply has a different air intake (straight into the valve, as opposed to through the rail and then into the valve).

Performance-wise, it doesn't make one lick of difference. I think they changed it because banjo bolts are just a pain in the butt and they wanted to simplify it.

But thats a nice looking gun, have a blast with it.

[PyRo]

Only changes are the new powerfeed plug (call to get one free if you didn't already), and they now come stock with the intelliframe (not a free upgrade).

[P@intB@ll_Cr@Zy]

with the air intake thru the rail, how do i disassemble the gun?

[P@intB@ll_Cr@Zy]

and what is a good website to purchase automags (RT) with a large variety...thanks.

[Dave]

Check DropZone out-

http://www.dropzonepaintball.com/html/airgun_designs.html

hehe, just wait for the new AGD online store....that place is gonna be rippin'!

-Dave

[MagNumPI]

I like your tool kit.. more or less same as me..