mag not shooting right please help.

[maglover52]

my mag isnt shooting right and i think it may be the level 10 so people who know what there doing please help.

ok this is what its doing. when you pull the trigger the 1st time it shoots fine. then you pull it again and it chuffs. then you pull again and its fine. then the 2nd time again it chuffs. i think its the level 10 but i dont know wether to go up in spacers or down?
here is a list of the parts.
emag valve w/ lvl10
emag h/r body
omega body rail
vert adaptwer
cp mini gas thru
intelliframe.

[myc1034]

are you useing CO2? if not then try to adjust your out put pressure.

[PyRo]

Short stroking/shootdown? Does it keep on doing it after the first shot untill it sits for a while, or it only does it 2x is ok for another shot does it again etc? Any trigger mods, bad reg seat?

[maglover52]

i am using a pure energy 68/3000psi so its not adjustable output. no trigger mods done. it chuffs on the 2nd shot. then the 3rd shot is fine then the 4th is a chuff ect.

[maglover52]

please help i am selling this so i need to get it fixed!

[athomas]

Try going with a larger carrier size. Hopefully, it won't leak and will give better performance. Don't forget to oil the bolt stem.

If its not the carrier causing bolt stick, put in a shorter/lighter bolt spring (and adjust the velocity accordingly). The lighter spring will help the firing consistency and it won't have a large affect on the level 10's ability to prevent chops.

[maglover52]

you know whats wierd i gassed it up yesterday and it worked fine? but then when i was playing with it it wasnt working right but it shot great yesterday.