Problem with Minimag

[aznchino16]

Wassup guys,
I just purchased a minimag and when i put the CO2 tank on, i can hear it leaking inside. I don't know what the problem is. I took the valve out and oiled it and put it back in and i can still hear the leak. Please help me out guys. Thanks.

[SkyBoySurfer]

lol well oil isint a "magical healer"
=P

where is the Air comeing from exactly? or where is the air going?

out the berral? out the vert reg?

Its O ring....thats your answer so far. and you will probily need a parts kit.

[PyRo]

Is the leak down the barrel, out the back, or kind of in the middle under the rail (on-off). If its down the barrel hold the trigger back and tell us wether that stops it or not.

[aznchino16]

i can hear it in the rail. is it maybe the velocity? do i need to adjust it?

[Dayspring]

If its in the rail, one of your on/off orings is shot.

[aznchino16]

well, i took out the valve and checked, but i didn't see any busted o-rings.

[PyRo]

You took the on-off assembly out of the valve and checked the four o-rings?

[aznchino16]

yeah, i didn't notice any busted o-rings.

[Dayspring]

Just cuz they aren't busted doesn't mean they aren't bad. Sometimes it's something in an oring you CAN'T see.

[SkyBoySurfer]

exatly.......just change out all hte orings in your on/off assembaly..and it should totaly fix the problem