Automag doubble feeding.

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • 314159
    Registered User
    • Nov 2001
    • 555
    #16
    as far as your problem goes, it sounds like the bolt is just slipping off of the sear.

    check to make shure that there is no lubricant on face of sear, if there is clean with alchohol

    check to make shure your sear is sharp and not chiped

    check to make sure you bolt edge that catches the sear is not worn

    check to make shure you have enough effictive length of the sear engaging the bolt (usually this is caused by the trigger rod set so that its final resting place would be past where the frame stops its travel, having the sear partilally up is the result of this). you can check this by just looking at the edge of the sear that catchec the bolt, you will notice a little discololation of the part that catches the sear, i don't know the length that should catch it, but that might be another thread all together.
    As society and the problems that face it become more and more complex and machines become more and more intelligent, people will let machines make more of their decisions for them, simply because machine-made decisions will bring better results than man-made ones. Eventually a stage may be reached at which the decisions necessary to keep the system running will be so complex that human beings will be incapable of making them intelligently. At that stage the machines will be in effective control. People won't be able to just turn the machines off, because they will be so dependent on them that turning them off would amount to suicide

    sometimes I just freaking hate people. which means the next day I will love them for the sake of balance, but right now I will just concentrate on the hating. Hate hate hate. Blaaaarg! ;)

    turborev - with ai like this, if it controlled any more than a paddle, it would kill you and everyone you care about. ;)

      Comment

      • 314159
        Registered User
        • Nov 2001
        • 555
        #17
        anyone have any ideas?
        As society and the problems that face it become more and more complex and machines become more and more intelligent, people will let machines make more of their decisions for them, simply because machine-made decisions will bring better results than man-made ones. Eventually a stage may be reached at which the decisions necessary to keep the system running will be so complex that human beings will be incapable of making them intelligently. At that stage the machines will be in effective control. People won't be able to just turn the machines off, because they will be so dependent on them that turning them off would amount to suicide

        sometimes I just freaking hate people. which means the next day I will love them for the sake of balance, but right now I will just concentrate on the hating. Hate hate hate. Blaaaarg! ;)

        turborev - with ai like this, if it controlled any more than a paddle, it would kill you and everyone you care about. ;)

          Comment

          • nerobro
            Registered User
            • Oct 2001
            • 923
            #18
            I called AGD today, they are sending me a set of V style nubbins to try on your gun. Pro-Team could only suggest that i try another nubbin. or to grind away the back of the existing nubbin to allow it deeper into the breach...
            To be an AGD supporter, one cannot be an AGD bigot. -Nero

            Truth is a complex thing. One must govern by simplicity. -M. Mercier, special counsel to his Majesty for domestic matters. The Brotherhood of the Wolf

            "You can't outrun Death forever, but you can make the bastard work for it."

              Comment

              • deded
                so.fresh.and.so.clean!
                • Nov 2001
                • 371
                #19
                I'd say bend the nubbin into the barrel a little further.

                If you have the video, watch it, and see how its done.

                If you don't have the video, I'll try to explain. Its pretty simple.

                You just take the nubbin out and bend it up at a steeper angle with needlenose pliers. Then you bend the other side of the V also, so the pointy side doesn't protrude into the barrel and stick balls.

                so where before it may have been like this

                ,-^-.

                it should now be more like this

                /\

                hope that helps!
                If at first you don't succeed, skydiving is not for you.

                  Comment

                  • nerobro
                    Registered User
                    • Oct 2001
                    • 923
                    #20
                    .... WE have. That was the FIRST thing we tried. And remember, the micromag does not have an adjustable nubbin. And it's nubbin sitcks more than 1/16" into the barrel. AGD only suggests you ahve 1/32 into the barre.
                    To be an AGD supporter, one cannot be an AGD bigot. -Nero

                    Truth is a complex thing. One must govern by simplicity. -M. Mercier, special counsel to his Majesty for domestic matters. The Brotherhood of the Wolf

                    "You can't outrun Death forever, but you can make the bastard work for it."

                      Comment

                      Previous 1 2 template Next
                      Working...