i was wondering why my ule trigger pull kit is not firing all the way. it shoots one by one, but if i start to rapid fire it, it sounds like my botl stopped on a ball but it does push the trigger pin back out. its shootin 280, but its jumpin alot. i already have 5 shims on it. hopefully someone can help me cause i gotta go play at waynes world tomorrow!!!
-
-
Make sure you are not short stroking... thats the biggest problem I had when I first got my ult.. not pulling far enough back during rapid fire.. if you have an adjustable tank try raising the psi a bit.. I went from a 800psi preset to an 850 psi preset and it's a world of difference.. if you also want to try messing with your shims a bit as well.. -
Lube. Make sure your using a good lube like KC trouble free. Don't use shocker lube or anything really heavy. I know this was causing the type of problem you were describing in my marker."[T]he evidence also strongly suggests that neither Billy nor Adam could have invented what is claimed."
-United States District Court judge G.M. King,
on Smart Parts' patent claim, August 23rd, 2004, page 16.
AO feedback
ebay feedbackComment
Comment