twist lock barrel , accurate?

[Chingis]

ok just want to say hi and thanks for taking the time to read my rammblings

i own a few mags a R/T , a Minimag , and a Ule Bodied Classic valve mag

first off my R/T shoots like a Dream havent broken a ball in 2 cases without a lvl X, but (theres always a But) it doesnt seem to have the accuracy im looking for and i think this is do to the Twist Lock Barrel system and is also the reason i went ULE Body.
when i shoot my R/T the barrel moves ever so slightly but it MOVES! this can not be a good thing.

So this is where my problem comes in I got all my parts for my ULE bodied mag and test shoot it out the patio door, and well it is more accurate but not by enough to justify what i have into that gun.

do i have some problems that i am over looking ?

i do not have a Freak system or the like so i do know that Barrel to paint match is a Huge Factor.this i understand, on the R/T is a All american 14in one pice , and the Ule is a 12 in Dye SS barrel

used the same air tank on both guns
problem i noticed most is inconsitant shoots 2 would be straight , one left then one right.

ok i rambled enough, ill just wait to see maybe ill have someone say do this and all my problems will go away.

thanks

[Tunaman]

buy some Evil and try it....you definitely will notice a difference using ROUND paintballs.

[PyRo]

What he said, the quality of the paint itself is a factor.

[ChucktheMAGician]

I've read that new o-rings might help you're wobbly barrel. I haven't had to change mine yet, just telling you what I read!

[PyRo]

You can also double up on the o-rings, or put a piece of tape in the groove to make them a little wider.

[Strider]

Definatly a paint issue. My twistlock barrels are as accurate as anything else with the proper paint.

Long Live Armson and AGD!

[Chingis]

cool , guess i was pretty foolish to run out and buy a ULE body to fix the problem , or maybe its just cause they are so dang cool :)

thanks Very much for the help guys im gonna try them out and see if any help