RT on/off pin?
I have a automag RT with #RT04409 and I bent my on/off pin and need to order a new one. The problem is there are 4 different sizes for a rt to choose from on the web site. I'am hopeing a tech will read this and help me out. thanks.
-
rt mag -
You want the .750 pin. -
Thanks alot!
rt magComment
-
I kind of have the same question. My Mag is very NON-Reactive. And I read somewhere a new on/off pin would fix this. I have an X-Valve and was wondering what size on/off I should get
Comment
-
Depends on the gun you put the Xvalve into.
If you want to up the reactivity, up your tank's pressure to the gun. (You need an adjustable tank to do so.)
Yes, TECHNICALLY, a shorter pin will up reactivity, it's not the right way to do it.
Remember- a gun will go from from full auto to not working in .015".Comment
-
I put the new X-Valve on my Minimag. It has had 10 cases at least so should be broken in by now.
But I really have no reactivity. When I compare to my friends RT Pro its ridiculious. Theres barely any return force and unless I pull the trigger all the way back to the frame and forward again it will chuff. But My friends RT Pro gets full auto off 800 psi???? I'm confused.
And I have tried adjustable tanks. At 1100 psi I only got a 2 shot burst, and that was after trying two tank fills. It will still shoot rather quick, but takes more work since theres no reactivity at all.
I was hoping the on/off pin was the issue, because I have no idea why its not reactive. I'm even considering sending my Minimag to AGD for a check up.
And in the corner of my mind I kind of blame the lvl 10 bolt. Could this be causing this? Its setup perfectly, it bounces off all paint and my finger. but I don't trust it...Comment
-
Has your friend modded anything on the gun? On/off, trigger rod, sear?
And you'll never get the SAME amount of reactivity. There are differences between all guns and tanks. Just like there are different size orings. You'll never get the PERFECT match.Comment
-
No, he (Tyler) never even added anything to his RT Pro other than his Intelliframe. He still hasn't gotten an Intelliframe. BUT his serial number is 296 I beleive, is that old?
Either way its kind of upsetting that he can get bounce so little effort and have to very hard to get a 2 shot bounce
Buts its ok, I'm getting an E-Mag real soon, so I will get to show him up.
(But would the on/off work??)Comment
-
You're using the correct on/off pin for your gun.
That's what it's supposed to be with that pin.
If you choose to do something to that- shave or go to a shorter pin, you're on your own.Comment
Comment