help, i don't know how to set up a warp

[paintball snipy]

how do i set up a warp feed to work with an impulse? what settings should i use??

[hitech]

Start Here. The first few posts should answer most of your questions. If after reading that you still have questions, feel free to ask.

[PyRo]

Read the manual... If you don't have one it can be downloaded off www.airgun.com

[paintball snipy]

i read the manual, but i don't know whether my gun sends out a positive or negative whatever. or does it send out anything at all?

[hitech]

Originally posted by paintball snipy
i read the manual, but i don't know whether my gun sends out a positive or negative whatever. or does it send out anything at all?

That is for "intellif-feed". I don't know if your maker includes it or not. Start with the vibration sensor setup. Try that first and see if you can get it to work.

[paintball snipy]

its an impulse. so realy, unless i set it to were it turns when i take a step, it won't hardly work.

[hitech]

Originally posted by paintball snipy
its an impulse. so realy, unless i set it to were it turns when i take a step, it won't hardly work.

Sorry, I've never shot an Impluse, so I don't know much about them. Assuming it is an electronic marker you should be able to follow the Angel instructions in the link I posted.