Building My Own mag

[.tMan]

Hey Guys,
Let me start off with saying that I know this has probably been done before but I need help. I have been looking for a mag that I like for about a year now. Still I have not found a used setup that I like. SO Ihave decided that this summer I will build my own mag. I have some parts that I know I want on the gun and a few that I would like on the gun. I need you guys, if it's not to much trouble, to lok over my list and see if I'm missing anything essential. I will be planning on buying most parts used, because I'm on a budget. SO without further adew here is my list.

- ULE dody; blue, black, or chrome
- Hyperframe if it fits in the budget; if not I'll be going with the ULE trigger
- X-Valve if I can't get a hyperframe
- Level 10, of course, can't forget these
- intelliframe if I can't get a hyperframe. Black or Nickel
- CP drop, blue, black, or chrome
- forgrip, don't know what kind yet; something simple. Blue, Black, or Chrome

and that's all I can think of right now. What else do I need that is essential? The things I am looking for used are the hyperframe, intelliframe, cp drop, forgrip, and maybe the ULE body.
Ok time to get some help.
Thanks,
Tanner "tMAN" Johnson

[Dayspring]

Actually, the Xvalve/Hyperframe/ULT combo is IDEAL. (Yes- all 3)

Otherwise, nice setup.

[.tMan]

Any other things I need?

[.tMan]

Oh I need a rail... Duh?!
any suggestions?

[Digits]

Originally posted by Dayspring
Actually, the Xvalve/Hyperframe/ULT combo is IDEAL. (Yes- all 3)

Otherwise, nice setup.

A ULT with a hyperframe? What benifits does this have?

And you would need.. Rail bushing, the field strip screw, field strip screw washer, the screw for the triggerframe, the triggerrod/sear, a barrel twist lock assembly and ermm an Automag/Minimag sear pin..

I think thats all

[PyRo]

The ULT trigger doesn't come back as hard as the stock on-off and therefore causes less wear on the frame.
He would need a rail that roguerail looks pretty sweet. I cannot see why it wouldn't worth with the hyper. If he is going ULE body he doesn't want a twist lock assembly because he will just have to remove it. I don't think he needs a sear or pin with the hyper, although he may, ive never see how a hyperframe workds. He will need the feild strip and front frame screw.

[.tMan]

all right
think I have most of the stuff I need on a List
thanks guys

[Dayspring]

One of the major complaints about the Hyperframe is that it couldn't push hard enough on the on/off pin w/ the small solenoid.

By using the ULT, it reduces the weight.

[Matt_mg]

I'm not making a new thread for this so basically if I order:

ULE Body
ULE Trigger kit
Hyperframe
A rail
X-valve

I'd need a:
Field strip screw
Front grip screw
field strip screw washer


About that roguerail, does it accept a gas-trough of some sort because I like having both my hands on the marker... Or maybe I could just order a rt pro body with a gas trough mount and the gas-trough?

Thanks for the answers

[Cryer]

I think the xvalves actually come with the ULT kits now. If not, then I believe they will soon.

Also, the rouge rail will fit pretty much any type of fore grip. Gas-thru or not. FMI, there is a thread in the dealers section called "Rouge Works" or something to that effect. within, there is a link to the Rouge rail.

Pretty sweet...

[Matt_mg]

up?

[headcase]

Originally posted by Matt_mg

Field strip screw
Front grip screw
field strip screw washer


About that roguerail, does it accept a gas-trough of some sort because I like having both my hands on the marker... Or maybe I could just order a rt pro body with a gas trough mount and the gas-trough?

Thanks for the answers

Everything you need to know about the Rouge rail is in this thread

You don't need to order the field strip screw washer, it comes with the screw. here