Brand new mag... help?

[Smitty2k1]

Hey all I just got a brand new mag from Tuna, and of course, the very night it came after firing some through it, I had to take it apart and explore. First mag I ever owned.
Now my question is, when I dissassemble it, and re assemble it, if I put the body on first (Like I think Im suposed to do) I cant get the valve to go in the back.
The problem is the bushing (brushing?) is sticking up to far. I press it back down, but when I put the gripframe on, it pushes it back up? Am I doing something wrong, or is my bushing loose or what?
Thanks all.

Oh yeah, andyone have a guid out for 'mags. Just like everything I need to know about assembly, dissasembly, care and maitence etc?
Pat Smith

[PyRo]

Thats your rail bushing, try putting the grip rail and mainbody together with the front frame screwthen pushing the bushing down into the grip, you might have to wiggle it around a little bit but it should go down there without much force.

[rikkter]

well buying a video may be the easiest thing, it'll show you how to 'debug' your gun and figure out where the leak is.

as for maintence, put a couple drops of oil in the fitting to the valve, and shoot about 20-30 times with the barrel off. try to do this after each time you play, or every other, and your mag will be running strong for awhile.

[SkyBoySurfer]

ya what pyro said....


put your rail...grip and body together....if the bushing is sticking out...just push it down with your thumb below the rails horizion...it should go down prety easly and thats it.

[Smitty2k1]

Yeah mine just doesnt go down easily :-/

[GT]

Re: Brand new mag... help?

Originally posted by Smitty2k1
Oh yeah, andyone have a guid out for 'mags. Just like everything I need to know about assembly, dissasembly, care and maitence etc?
Pat Smith

my sig?