going to set my RT ON FIRE! AGD TECHS HELP!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RSUAVE911
    Posts: 0
    • Nov 2001
    • 395
    #1

    going to set my RT ON FIRE! AGD TECHS HELP!

    Ok I have two problems with my gun

    1)
    For some reason the balls are not feeding into the barrel correctly, IT IS LIKE JAMMING in the frame, its like the balls are not fitting almost into the hole where the barrel and frame meets. I am sure its not the balls...It either has to be the stock barrel(trying to get a new one), plug(which I think might be it), or the frame itself.

    2)
    I have put a shortened on/off pin in, and after I rapid fire it leaks, I would have to apid fire for like 2 or 3 times and then it would start.

    (PS- I attached a pic, so maybe it might be my setup)

    SO PLEASE ANYONE HELP! email me or reply

    [email protected]
    ---------------------------------------
    "Man this yoohoo is good, you know what else is good, smokin dope."

    Tags: None
    • RSUAVE911
      Posts: 0
      • Nov 2001
      • 395
      #2
      picture
      ---------------------------------------
      "Man this yoohoo is good, you know what else is good, smokin dope."

        Comment

        • RSUAVE911
          Posts: 0
          • Nov 2001
          • 395
          #3
          SORRY NO PICTURES SOMETHING IS NOT WORKING RIGHT..SORRY


          UP
          ---------------------------------------
          "Man this yoohoo is good, you know what else is good, smokin dope."

            Comment

            • BlackVCG
              Grubby Owner

              • Oct 2000
              • 4956
              #4
              Try this, with balls in your hopper feeding into the gun, and the plug turned so balls can go in the breech, slightly pull back on the plug until the balls drop in the barrel, or the plug comes all the way out of the mainbody.

              Also, try fitting the paint to your barrel. If the paint is so big that it can't go through the barrel, that's a problem.

              Do you have a longer on/off pin? When's the last time you've oiled your valve?
              My Feedback

                Comment

                • RSUAVE911
                  Posts: 0
                  • Nov 2001
                  • 395
                  #5
                  Ok as for the feeding problem I think I have it resolved because I have an older power feed plug instead of the newer parabolic PF Plug...


                  Yes I do have a longer one and I just oiled it today.

                  plmk..thanks
                  ---------------------------------------
                  "Man this yoohoo is good, you know what else is good, smokin dope."

                    Comment

                    Previous template Next
                    Working...