i Need some Advice!!!

[Toto]

Ok
First of all i will introduce my self because this is my first post in this forum
HELLO!!!
I am Toto a proud Mag Owner from Argentina
I need some advice because i want to upgrade my Mag, in this moment it`s preetty standard, i will tell the actual configuration of my mag, and the things that i want to put on it.
Automag 68 Classsic (powerfeed)
Aci SubZero Xpansion Chamber 6 stage
GasThru T Stock with coiled hose remote
16 inches Smart Parts Bigdady Barrel
Taso Sight Rail
VL 9v revy
and it's running on Co2 because here in Argentina we dont have HPA or nitro fill stations.

I want to upgrade to LVL10 bolt and the IntelliFrame
Would any of you recomend me to do such thing??
I am asking this because the gun is running on Co2 and i dont know if the LVL10 will have problems with that, the same whith the intelliframe, i am afraid that if i increase the Rate of Fire i may have problems whit the valve (freeze) i use to have this problem thats why i bought the remote.

Thanks
Toto
P.D.: my english its preety rusty i hope that everyone understands what i just put!!!

[Eric Cartman]

Hey Toto. Welcome to AO.
It's really a shame about not having HPA. Since all you've got is CO2, it sounds like you've got a pretty good setup to avoid freeze up. The intelliframe is simply an extremely nice manual trigger frame. While you may be able to raise your rate of fire with it, it doesn't mean that you have to fire faster, so I wouldn't worry about that.
I know that reactive valves need compressed air or nitro to run, but I'm not aware of any such restriction on the level 10. Although I never really chopped before the level 10, it is nice to know you don't have to worry about chopping at all.
I'd definately recommend both upgrades highly.

Cheers.

[PyRo]

Both good upgrades...

Plus with the intelliframe you can hook up an intellifeed to your rev.

[Toto]

Originally posted by Eric Cartman
Hey Toto. Welcome to AO.
It's really a shame about not having HPA. Since all you've got is CO2, it sounds like you've got a pretty good setup to avoid freeze up. The intelliframe is simply an extremely nice manual trigger frame. While you may be able to raise your rate of fire with it, it doesn't mean that you have to fire faster, so I wouldn't worry about that.
I know that reactive valves need compressed air or nitro to run, but I'm not aware of any such restriction on the level 10. Although I never really chopped before the level 10, it is nice to know you don't have to worry about chopping at all.
I'd definately recommend both upgrades highly.

Cheers.

Thanks!!!
The problem here is that the paintballs that we use here in Argentina aren't the best in the market, and if you are lucky enough to get some good quality the problem is that those paintballs where stock in a wherehouse for about six months, and the shape is more like an egg that a ball
thats why i want to get an antichop system, the las time i used 1000 BrassEagle paintballs, they where half yellow and half black, for every 5 or 6 balls taht i shoot the next one explode inside of the barrel
The other problem is that a box of paintballs here cost 90 dolars, and 1 dolar is about 3 argentinan pesos
My other problem is that i got to find an e-store that can shio to Argentina


Thanks for the advice

Toto

[1ofkind]

Just order paintballs from www.paintballgear.com

[Toto]

Originally posted by 1ofkind
Just order paintballs from www.paintballgear.com

The problem is that a box of 2000 paintballs is about 50 or 60 dolars, plus shipping plus taxes plus the over weight (dont forget that a case of paintballs can weigth about 7 0r 8 kilos), in result is to damn expensive, even more than to shoot the crap that we can buy here
about tho year ago the paintball here in argentina was starting to grow up for good, for years we only play recball or war games, the owner of Mekong Paintball Field opened the first SpeedBall field here in Argentina but he did not find the success that he thought it will be, and now thanks our economy we can not aford to play speedball because its too expensive!!!

[sneakyhacker420]

ok, i'll explain this all to you, and i may be 14, but i have alot of experience with mags and what helps them work!

ok, as far as the level 10 goes, you will have no problems whatsoever with co2, besides more "chuffing" if the valve freezes over from rapid fire

intelliframe, it will increase your rate of fire, and if you don't already have one, i highly suggest a 6-stage expansion chamber, and/or a Palmers stabilizer (probably the BEST reg to ever be used with co2... liquid co2 will NEVER touch your valve again )

[Toto]

I allready have an ACI SubZero 6stage xpansion chamber
but i am thinking to buy one reg

thanks

[sneakyhacker420]

ok, KEEP the expansion chamber and get the palmers stabilizer that hooks up to the AIR valve, and then the air line hooks into that, thay way you have double protection


heres a link to it:

http://www.palmer-pursuit.com/online-catalog/stabilizer-sideline.htm

that is the one and only reg that is probably better with co2 than n2

trust me, i know my stuff


give me your e-mail and i can send you a video of my friend with his mag on co2 with a stabilizer hitting 14bps on his autoresponse frame, not having dropoff or a frozen valve ONCE!!!


may i also add that you might want to think about getting a 12v Revvy instead of the 9v... and make sure its one with x-board

[PyRo]

Id suggest if your local store has any in stock, or if you know anyone with them give the y grip or z-grip a try, you may just fall in love

[FragTek]

Exactly what brand/make of paint do u get in Argentina?

[=-Crash-override=-]

im making a clasic sniper and i just want to know if its posible to put a back spin on the ball using a burst of gas
im trying to angel macro line in to the portings on the top of the barrel and use a co2 source that is timed when the ball reaches the end of the barrel just wondering if its possible

[Toto]

My email is
[email protected]

We can get some brasseagle or Sherer paintballs, some times Zap
but the qualty of the balls sucks

thanks