intellifeeding my evo2

[iisp0tii]

i tried to ittelifeed my evo 2 and it doesnt work. i followed the directions but when i pull the trigger just the battery light comes on. someone help me out.

[ChucktheMAGician]

Evo 2's spin after each shot anyway. Running a switch from the trigger to tell it to spin isn't needed.

[FragTek]

Originally posted by ChucktheMAGician
Evo 2's spin after each shot anyway. Running a switch from the trigger to tell it to spin isn't needed.

This is definately true, but this is also true about the revvy it too spins after every shot w/o the help of intellifeed.

But, when trigger actuated it actually starts to spin your hopper before it usually would using the eye setup. This is because the hopper wont start to spin until the next ball falls into the chamber AFTER the first shot has taken place.

Thus, improving the feed time on virtually any hopper if it could be wired correctly.

[ChucktheMAGician]

Originally posted by FragTek
This is definately true, but this is also true about the revvy it too spins after every shot w/o the help of intellifeed.

If it works on sound like a reloader, if it works on the eye like a standard revy it has to wait for a break in the line of paint. This is what the intelli was made for.

[FragTek]

Yuppers.

[tippmannhunter8]

DO NOT INTELLFEED YOUR EVO 2! you will fry the board i just did it and you can not just go back to regular feed the sensor is burned i have a new board in the mail not and my radio shack parts are going in the wood burning stove!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[FragTek]

wow, thanks! sorry to hear about your eggo

[tippmannhunter8]

ahhhh it no HUGE expense i got annother board from ebay for thirty bucks its better than 95 for a new one i really like this idea though so i got a whole new hopper setup along with that board in the mail a new 12 volt revy with the x board and all that and impeller so i will intellefeed that now i am really pissed though i got my level 10 bolt from 888 two days ago and it was scheduled to be here for today and i stepped out for lunch maybe 15 minutes and i missed the guy paper says i need to sign for it so here will be here tomorow NOTHING WILL PART ME FROM THIS HOUSE TOMORROW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!! lol

[iisp0tii]

my dad helped me out w/ the intellifeed and it works now. the speed adjustment works too.

[FragTek]

No way, please take some pix and send a wiring diagram.

I want to do this to my eggo really bad! Egg lag sux0rs!