Lx problems.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ICOM
    zee best
    • May 2002
    • 1372

    #1

    Lx problems.

    Ok first off i use the longest spring, think 2 shims. I shoot around 250-270 velocity.

    I also tried using boomy and a 32 degrees.

    My problem is sometimes my gun chuffs sometimes it doesnt, i start to rapid fire and i get chops paint spraying out and all kind of chuffs. Ace is on too. Then sometimes i shoot it works fine. I dont get my lx. :\
  • Dayspring
    aka- The Day Wang

    • May 2001
    • 9664

    #2
    Check your bumper.

    Believe it or not, it WILL make a difference.

    Comment

    • ICOM
      zee best
      • May 2002
      • 1372

      #3
      Thx nick but i really think if its chuffing it would be the lvl10. Like i thought i should go to stock spring and maybe use a bigger carrier?

      Comment

      • Dayspring
        aka- The Day Wang

        • May 2001
        • 9664

        #4
        Actually no...

        We had this problem on 2 Level 10 setups in the past month. The same overall problem was the chewed up bumper. Once the new bumper went in, the gun shot fine.

        If this has started all of a sudden or has been a gradual thing, that means that a part has worn out somewhere. I told you that last night in chat.

        Comment

        • ICOM
          zee best
          • May 2002
          • 1372

          #5
          ok but i am gonna go to short spring then anyway, becaus ei hear dbad things about longest spring and good about short

          Comment

          • Dayspring
            aka- The Day Wang

            • May 2001
            • 9664

            #6
            Split the difference and go mid.

            Comment

            • ICOM
              zee best
              • May 2002
              • 1372

              #7
              i did try mid it did chop less i think but i just didnt like it. If i go stock will it effect the trigger pull at all? and wont it be harder on paint and be chopping more.

              Comment

              Working...