I need more help on Nitrogen Tanks

[68automag1212]

What amout of psi should I use for my 68 classic automag? Please be specific in you answer because I don't know that much about nitrogen tanks. I also want to know if the nitrogen tanks screw on the same way that CO2 tanks do. When you take of nitrogen tanks do they leak out some air like CO2? Well thanx

[DaNMaN14]

Anywhere between 600psi-800psi is good for the mag,and yes they screw on the same way and have the same threads,and they dont leak air as much as co2 does,and they dont go through as many o-rings as co2 does.

[TransMan]

Screw in pre-set(non adjustable out put psi) are liek Co2 and it will vent the air out of the line when u unscrew it. Most presets if they are high presure will have an out pu of 800 or 850 psi which is about what u want for a mag. if u get an adjustable tank it will not screw in liek a preset will. You will have to get a drop to hold it and u can adjust the output preasure to what ever u want with a mag it need to be between 700-1000psi. Just remember when ur buying a tank for a mag it has to be a high presure output tank a low preasure tank will not work.