Automag 68 Level 7 air problems

[excetara2]

I took apart my mag yesterdaY because it hadn't been working. I oiled everything up and made sure it was installed right. Then I pluged my tank in to see if it would work. Then about the first 30 shots it worked correctly. Then it started doing the same thing as before. Only a little air would come out the barrel. If I held the trigger down a little. Air would leak out. THe trigger would stay back. To get the trigger to move forward I would have to push against the ball. Then I would pull it again. The same thing would happen. Any suggestions. I hope so because if I don't get it working I think I'm going to have to let it go.

[onakone]

If you don't have one already you should get a power tube spacer kit and try out a few different spacers, there's a good chance that'll fix your problem.

[excetara2]

Thanks for the advice. i will try to do that.

[PyRo]

If you hold the trigger all the way back it doesn't leak right? If thats teh case PT spacer. Although you might want to just get the level 10.