RT pin picture

[Kimmo]

Does anyone have a picture how the pin that extends into the regulator body should look like with all the o-rings and stuff.
My gune is modified so it would be interesting to see how it should look like.

[Kimmo]

RE..

I looked at the cutaway-color pic. How many black spacers should there be on the valvepin??
There were some broken on mine...

[Xzion]

Hey, got your email, I was thinking of the wrong pin, I'll go out and scan a pic of mine right now, not sure how well it'll look, but its worth a try.

[Xzion]

RT Valve Pin

Heres the pic of the RT Valve pin, its setup something like this going from left to right on the pic ive included.

5 Black washer looking discs
1 Larger brass washer
1 Urathane o-ring
1 Plastic spacer
1 Urathane o-ring
1 Tiny black washer (holds the unit together)

[Russ]

Kimmo,

There are no "user servicable parts" in the reg pin. It must be replaced as an assembly. You'll need to order a new unit from AGD. Good luck.

From the AGD website...
Reg Valve Pin Assy - RT $27.00

[Xzion]

There are no "user servicable parts" in the reg pin. It must be replaced as an assembly. You'll need to order a new unit from AGD. Good luck.

From the AGD website...
Reg Valve Pin Assy - RT $27.00

hey! I knew there was something I was forgot something I was gonna mention while I was scanning the valve pin!

[BlueMagRT]

i replaced all of the o-ring on my reg pin.... is this a bad thing.

[BlackVCG]

No, replacing the o-rings is fine. They include them and one of the plastic spacers in the parts kit.

[Lord Vader]

How do you get the plastc spacer onto that pin?

[Kimmo]

followup

I called AGD. They will send the washers right away.
Thats good service!!!
My marker is the old RT. On that RT there should be 10
black spacers they told me at AGD. Xzion do you have a RT PRO??


LordVader: you will get them there if you take off
the small tiny thing. Carfully...

[BlackVCG]

The plastic spacer has a cut in it so you can get it on the pin.

[Xzion]

I actually have a ReTro Valve, but the RT PRO, the E-Mag and ReTro Valve are exactly the same, the only difference is the text on the side of the valve, which makes no significant difference at all, aside from perhaps cosmetic qualities.