Extremely frustrating, need help.

[JG2790]

Ok, I've read the stickies, looked at the E-Valve diagram several times, and replaced the PT Oring several times, but my E-Mag is still leaking from the barrel. What happens is when I pull the trigger on M-Mode it blasts alot of air out the barrel and then it keeps leaking out. If I degas then regas the marker, it leaks automatically. And yes, I have oiled the pt oring..

This is extremely frustrating since I've never got to use this marker since I've got it, and I was lead to believe that Mags are realible, but at this moment I've given up and I really need help.

-JG2790

[Cthulhu]

Does your mag have a level 10 bolt in it? If you take your squeegee and push on your bolt, does the leak stop?

[JG2790]

No, it's not LX. I would just install LX to bypass my problems, but when I got the kit it was missing the backup washer so Airgun is shipping me another one, I'm really hoping it gets her Friday caise I really want to play with my E-Mag on Saturday.

[JG2790]

Someone help please.

-JG2790

[Cthulhu]

Does it leak when you apply preasure on the bolt with your squeegee?

[abunkerer]

sounds like you are missing an or have a broken oring in the valve.
however, you should recheck the on/off assembly.
also make sure the spring is pushing the bolt all the way back into position.
what's your input pressure on your n2, could be a leak caused by low pressure not reseting the valve.

[Gadget]

If it's leaking down the barrel with a standard Level 7 bolt and you've replaced the PT o-ring, you need to goto a smaller PT spacer.

If the PT spacer is too large it holds the PT o-ring too far away from the bolt stem, causing a leak.

Also try fitting a new bolt spring.

Mags are reliable, it's just a steep learning curve at the start.

[ChucktheMAGician]

Gadget said what I was thinking. Also make sure you aren't mixing Level 7 & 10 parts, like powertube tips and bolts. Hopefully that Level 10 washer will get there in time.