compressed air?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JW999
    Registered User
    • Nov 2003
    • 1
    #1

    compressed air?

    Hi guys, I recently purchased a used RT valve for my 68 automag. I was wondering what the best way to hook up compressed air to my marker would be? If i get a preset tank should i get a high pressure or a low pressure one? Do I need to run a regulator, if so any suggestions on what type? also what is the suggested input pressure to the valve?
    Thanks
    Tags: None
    • MrWallen
      TunaMax#4
      • Sep 2002
      • 536
      #2
      If you get a pre-set, you'll want high pressure. You don't need a reg, the valve already has one built in. If you put a reg on, you will starve the valve of air. Not positive, but I think input is somewhere around 700+?

      AGD - "I WILL KEEEELLL YOU ALLLLL! then we love you long time...."
      quik -"10 round tubes and 1/2 naked asians? This cant be good."
      "I hear it's amazing when the famous purple stuffed worm in flap-jaw space with the tuning fork does a raw blink on Hara-kiri Rock. I need scissors! 61!"

        Comment

        • Dayspring
          aka- The Day Wang

          • May 2001
          • 9664
          #3
          Most presets are around 850 (the high pressure ones)

          That's the one you want. The mag wants a MINIMUM of 600psi into it. No other regulators or anything needed.

            Comment

            Previous template Next
            Working...