emag board???

[blakdragon21]

Can any emag board be upgraded? Even if it is like from 2 years ago? Also does the age of an emag matter?

[rikkter]

yes it can be upgraded.
as for the age of the gun, it doesn't really matter. the only problems you *might* see would be sear and or solenoid. but if it shoots fine then you should be fine

[Evil1]

What would the problems that might be encountered w/ the solenoid and sear if an upgrade was installed?

[rikkter]

i'm talking about the age of the gun, as in the amount of use on the sear and solenoid.
after awhile my eclip broke on the solenoid plunger, and whacked bottom of solenoid and spaced it out, which is wasn't suppose to do.

[Branchvillian]

You shouldn't encounter any problems solely from getting your board flashed.

[Evil1]

Alright, thanks guys you just had me worried b/c I am planning to get my gun flashed soon, and I just didn't want to have any problem w/ it.

[rikkter]

well like we said, the only problem you MAY have is the full auto glitch, which is a easy fix

[Branchvillian]

If you have never encountered any f/a problems as of now, there's a good chance you won't with 3.2. ALot of people have reported getting the problems on older software, just not to the extent that 3.2 has brought out. Either way, it's an easy fix.

[Evil1]

If the issues do come up w/ my 3.2 when I get it, I mean the f/a glitch, the solution is to just reverse the wires from the solenoid to the board right?

[rikkter]

yes, there is a thread titled 'possible resolution to 3.2 glitch' that eplxains it

TK flashed mine and checked it, and said it was wired correctly, but if the battery is nearly dead, i get the full auto, but not once has it gone full auto with a fresh battery