minimag question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tipper13
    Registered User
    • Dec 2003
    • 7

    #1

    minimag question

    1. would i need a new valve to use nitro threw a minimag?
    2. how good is the shochteck in-line reg?
    3. how long of a drop could i get with the minimag and reg?
    4. where can i buy a hyper grip frame and how much are they?
    5. does any one else make a eletro grip frame for a minimag?
    6. how good is the stock barrel on the minimag?
    7. and whats the opperating pressure on one?
    8. does anyone make a lpr for one or something like that?
    9. is the intelliframe eletro?

    thanks-
    Last edited by tipper13; 12-22-2003, 06:39 PM.
    poo on a stick!
  • tipper13
    Registered User
    • Dec 2003
    • 7

    #2
    and will a 70ci 4500psi crossfire nitro tank fit on a lapco drop?
    i dont know if lapco makes more than one drop, so heres a pic of it,,, dont know if it will work..

    drop


    and what kind of barrel threds does a minimag have, is there such a thang as a mag threds?
    thanks
    Last edited by tipper13; 12-22-2003, 06:30 PM.
    poo on a stick!

    Comment

    • ChucktheMAGician
      Back at it
      • Oct 2002
      • 1855

      #3
      1. Nope
      2. Good, but not needed for a mag as you would be triple regging (tank,inline,mag valve) shootdown would be a problem and people would laugh at you.
      3. See 2., Don't use the reg. run the line from the ASA to the mag valve.
      4. Used ones show up in the Classifieds but you'll have to search the stores yourself
      5. Boo-yaah used to but currently Centerflag is the only one.
      6. Never used one. AS long as the paint fit good I think it would be good tho. Personally I'd get a barrel/kit before the electro frame.
      7. Input pressure should be greater than 600psi and operating pressure is around 400psi
      8. If you're looking for something to be good on paint, get Level 10
      9. No, you can mount a switch in it tho.
      10. Not sure on that drop, I'd guess so but not positive.
      11. Mag threads are referred to as twist lock. There are grooves cut in the barrel. They slide in and turn left or right and lock in place.
      12. Welcome to AO
      Feedback from: AO,PBN

      Comment

      • jewie27
        Senior Member
        • May 2001
        • 1275

        #4
        The Minimag valve operates at about 400 PSI.

        Comment

        • Dayspring
          aka- The Day Wang

          • May 2001
          • 9664

          #5
          This is true, but if you try and feed it 400, then it won't work.

          You want a MINIMUM of 600psi going into the gun. 850 is prefered.

          Originally posted by jewie27
          The Minimag valve operates at about 400 PSI.

          Comment

          • paintbattler
            Mags > Cockers
            • Nov 2001
            • 2754

            #6
            1. no
            2. I don't know from experience but have heard they are alright. You don't need one though.
            3. if you get a drop get a shocktech
            4. I'm sure 888paintball carries them or pbgear.
            5. Center flag and Boo-Yah are the only ones to my knowledge.
            6. The stock barrel isn't sataisfactory. I would reccomend another barrel.
            7. I'm not too sure.
            8. dunno
            9. No
            Someone took away my cool sig. *cough*mod*cough*

            Comment

            Working...